DAPAI ENERGY · MODEL SPECIFICATIONS

24V 230Ah Lithium Forklift Battery

The DAPAI 24V230Ah catalogue model combines a 25.6V nominal LiFePO4 system with 230Ah capacity in a listed 650 × 500 × 240mm enclosure. Use these specifications to begin a vehicle-specific fitment review.

25.6V NOMINAL230Ah CAPACITYLiFePO4 CHEMISTRY
Check model fitment ↓
Lithium forklift battery pack with monitoring display and power cables
Representative DAPAI lithium battery image. The final enclosure, connectors and supplied configuration must be confirmed against the selected model drawing.

CATALOGUE REFERENCE

24V230Ah battery specifications

Catalogue model24V230Ah
Battery chemistryLithium iron phosphate (LiFePO4)
Nominal voltage25.6V
Rated capacity230Ah
Nominal energy (calculated)5.89kWh
Catalogue charge current30–100A
Catalogue discharge current230A
Enclosure, L × W × H650 × 500 × 240mm
Catalogue-listed weight110kg*

*The catalogue marks weights as including counterweight in some entries. The listed 110kg must be confirmed for the exact supplied configuration and compared with the truck’s minimum battery-weight requirement.

Nominal energy calculation: 25.6V × 230Ah ÷ 1,000 = 5.888kWh. This is a nameplate calculation, not a guaranteed usable-energy or runtime figure. Runtime depends on vehicle load, duty cycle, operating conditions and the permitted state-of-charge window.

Match the model to the real installation

01 / Space & truck voltage

A 240mm listed enclosure height may help an initial review of battery space, but the full 650 × 500mm footprint, mounting, cables and connector clearance must also fit. This model is a reference for an approved 24V-class vehicle system; its nominal voltage is 25.6V.

02 / Charging & BMS

The catalogue lists a 30–100A charge-current range for this model. Confirm the approved charger output, charging profile, connector and any BMS communication together. A 24V label on an existing lead-acid charger does not by itself establish compatibility.

03 / Weight & daily work

Confirm supplied battery weight, any required counterweight and vehicle approval. Share operating hours, loads and planned charging breaks so capacity and current limits can be reviewed for your work cycle.

Charging and operating conditions

The parent catalogue lists a charging temperature range of 0–55°C and a discharge range of −20–60°C, subject to model and configuration. Confirm the limits and protections for the selected pack, particularly for cold storage or demanding environments.

Battery management, display and remote-monitoring options depend on the project. Ask DAPAI to confirm the configured functions and interfaces. A lithium replacement should be reviewed with the vehicle and charger suppliers before installation.

Specification source: the 24V230Ah entry in the DAPAI lithium forklift battery catalogue. Compare confirmed values from the final drawing before purchase.

MODEL-SPECIFIC ENQUIRY

Discuss a 24V230Ah battery configuration

Send the forklift model, battery label, tray measurements, minimum battery weight, connector photo, charger details, shift schedule, quantity and destination. If a requirement is unknown, include a photograph or ask for confirmation.

Request a 24V230Ah fitment review ↗