HFSW SERIES · LITHIUM FORKLIFT BATTERY CHARGERS

Product specifications and safety guidance are based on the supplied user manual. Confirm final details with the equipment manufacturer.

HFSW SERIES   /   INDUSTRIAL CHARGING SOLUTIONS

SMART CHARGING.
BUILT FOR INDUSTRIAL POWER.

High-frequency lithium forklift battery chargers engineered with LLC resonant conversion, active PFC and real-time CAN communication with the battery management system.
Explore Charger Models
Installation & Safety
24V / 48V / 80V Series   •   3–20 kW   •   LCD Touchscreen

ENGINEERED FOR RELIABLE CHARGING

Designed for lithium-powered forklift applications, the HFSW series combines intelligent control, high-frequency power conversion and integrated monitoring in a compact, forced-air-cooled system.

HIGH-FREQUENCY EFFICIENCY

LLC resonant conversion and active power factor correction. The manual specifies input current total harmonic distortion below 5%.

CAN / BMS INTEGRATION

CAN bus communication with the battery BMS enables charging parameters to be tracked and adjusted in real time.

INTUITIVE TOUCH DISPLAY

Full-color LCD touchscreen displays charging voltage, current, elapsed time and fault information.

CHARGER MODELS & SPECIFICATIONS

Six standard configurations for 24V, 48V and 80V lithium forklift battery systems, with rated output power from 3 kW to 20 kW.
ModelRated PowerOutput CurrentOutput VoltageAC Input
LI-D24V/100A3 kW100 A18–34 V DC1-phase AC 220 V
LI-D48V/100A6 kW100 A20–60 V DC3-phase AC 380 V
LI-D48V/150A9 kW150 A20–60 V DC3-phase AC 380 V
LI-D48V/200A12 kW200 A30–60 V DC3-phase AC 380 V
LI-D80V/100A10 kW100 A30–100 V DC3-phase AC 380 V
LI-D80V/200A20 kW200 A30–100 V DC3-phase AC 380 V

Specifications are reproduced from the supplied HFSW user manual. Verify electrical requirements and compatibility with the specific equipment nameplate and manufacturer before installation.

BUILT-IN PROTECTION. PRACTICAL MAINTENANCE.

ELECTRICAL & THERMAL PROTECTION

  • Input overvoltage, undervoltage and phase-loss protection
  • Output short-circuit, overcurrent, overvoltage and reverse-polarity protection
  • Charging connector and module overtemperature protection

ROUTINE MAINTENANCE

  • Keep the charging connector clean, dry and free of debris
  • Check for unusual noise, vibration or odor
  • Inspect cooling fans and cable insulation
  • Clean the air-inlet dust filter approximately every 30 days, as conditions require

SAFETY & INSTALLATION ESSENTIALS

High voltages and currents are present. Installation, electrical connection and maintenance must be performed by qualified personnel in accordance with applicable electrical safety requirements.
  • Allow more than 50 cm clearance at charger air inlet and outlet
  • Disconnect AC input and battery power before accessing the cabinet
  • Provide reliable protective grounding; do not connect protective earth to neutral
  • Never unplug the charging connector while charging; press STOP first
  • In an emergency, disconnect the charger input power immediately

Operating conditions stated in the manual: -20°C to 50°C normal operation; 45°C to 65°C derated output; above 65°C thermal shutdown.

REQUEST A QUOTE

Tell us your forklift battery voltage, preferred charger current, plug type and quantity. Our team can then help confirm the suitable configuration.

Prefer to contact our sales team directly? Reach us by WhatsApp or email. We can help you choose the right charger model for your forklift battery.

DIRECT SALES CONTACT

Chat on WhatsApp · +86 178 1770 3765
Email: a1961712528@gmail.com

HFSW SERIES · LITHIUM FORKLIFT BATTERY CHARGERS

Product specifications and safety guidance are based on the supplied user manual. Confirm final details with the equipment manufacturer.